Aluprof DC1690 Podręcznik programowania - Strona 4

Przeglądaj online lub pobierz pdf Podręcznik programowania dla Przełącznik Aluprof DC1690. Aluprof DC1690 4 stron. Plaster switch with radio receiver
Również dla Aluprof DC1690: Instrukcja obsługi (2 strony)

Drukuj stronę
Aluprof DC1690 Podręcznik programowania
PROGRAMMING MANUAL FOR UNDER PLASTER SWITCH WITH RADIO RECEIVER DC1690
6. CHANGING THE OPERATING MODE (PULSED / CONTINUOUS)
Press and hold simultaneously "UP" and "STOP" buttons with power
supply on.The indicator light is on.
Pulse mode enables, i.a. step control of venetian blind.
7. RESTORE FACTORY SETTINGS
Press and hold simultaneously "STOP" and "DOWN" buttons with
power supply on.The indicator light is on.
4
After 6 seconds
indicator light flashes 3 times.
After 6 seconds
indicator light flashes 3 times.
The setting has been saved.
Factory settings restored
We reserve the right to any technical change.
Valid on 2022.02.09