Aluprof AL-BR02 Instrukcja instalacji, montażu i obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja instalacji, montażu i obsługi dla Jednostka sterująca Aluprof AL-BR02. Aluprof AL-BR02 4 stron. Gate control unit
Drukuj stronę
3. Technical specifications.
- Power supply: ~230V/50 Hz
- Power consumption: 0,4 W
- Fuse: 10 A
- Works with motors up to 230 Nm
- Frequency: 433.92 Mhz
- Up to 12 transmitters can be programmed
- Operating temperature: ~ -20
- Average range: 200 meters (in open space)
35 meters (inside buildings)
- Dimensions: 93x57,5x26 mm
Company reserves the tolerance of catalog data due the different conditions usage.
Works with S, BD and M versions of tubular motors and can match all DC remote controllers.
4. Layout of the elements.
5. Wiring diagram.
2
o
C ~ +60
o
C
1
2
3
4
5
6
7
8
1 - Operating mode
2 - Programming the direction of movement
3 - Input / Output AC
4 - LED diode (status)
5 - Programming button
6 - UP
7 - STOP
8 - DOWN
AC
Input / Output
E
Protective wire
L
230V AC supply – L wire (phase)
N
230V AC supply – N wire (neutral)
COM
Drive supply – N wire (joint)
UP
Drive supply – L1 wire (UP direction)
DOWN Drive supply – L2 wire (DOWN direction)
We reserve the right to any technical change.
Valid on 2021.11.29