ARTRAY ARTCAM-0016TNIR-TEC Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Aparat cyfrowy ARTRAY ARTCAM-0016TNIR-TEC. ARTRAY ARTCAM-0016TNIR-TEC 13 stron. Usb2.0 ingaas nir camera
Również dla ARTRAY ARTCAM-0016TNIR-TEC: Instrukcja obsługi (11 strony)
Drukuj stronę
9. System Requirements
9.1. Recommended System Requirements
● Intel chip set, Southbridge above ICH6
● CPU: Intel Core2duo 2.4GHz or higher
● Memory: ≧512MB
● OS: ≧Windows 7
9.2. Minimum System Requirements
● USB2.0 Enhanced Host Controller
● CPU: Intel Pentium4 1.7GHz or higher
● Memory: ≧256MB
● OS: ≧Windows 7
Caution
■ Please refer the restrictions below when you use ARTCAM.
(1) Recommended System Requirements
If the system specifications do not meet the requirements recommended above, it may be difficult to run at the
maximum frame rate. In order to make full use of the camera, please prepare a PC with the above
recommended specifications.
(2) USB Cable Extension
We cannot guarantee the functionality of the camera if the user adopts extension cables or repeaters which are
not confirmed by us. With the extension cables or repeaters, the bandwidth of transfer may differ, and thus caused
malfunctions such as a low frame rate or recognition failure on the camera.
What may cause the problem is that the regulation of the power lines becomes not enough, and so causes
impudence mismatch on data signals.
*For the recommended extension cable, please contact our sales department. (TEL: +81-3-3389-5488)
ARTRAY CO., LTD. Obtained ISO 9001: 2015 2018/9/17
1-17-5 Kouenjikita, Suginami-ku, Tokyo 166-0002 Japan
Tel: +81-3-3389-5488
Email: [email protected]
- 13 -
Fax: +81-3-3389-5486
URL: www.artray.us