AluTeam BR 13x-3 Instrukcja montażu - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Ciężarówki AluTeam BR 13x-3. AluTeam BR 13x-3 14 stron. Box kits

Drukuj stronę

Fig. 391

front

rear

Fig. 393

Assembly instructions BR 133-3 to 139-3

Fig. 383

Fig. 384

Fig. 385

Fig. 392

rear

Fig. 395

Fig. 394

In case of the optionally supplied side rise MA 200373, first re-

•

move the nuts and washers

•

Take the rise, fit it from below and screw it back with the wash-

ers and nuts. Tighten the nuts securely with the prescribed torque

(Fig. 383).

With the fender bracket option KS 320185, the brackets are pre-

•

assembled to the sub-structure with cross beams (Fig. 384). Screw

off the brackets. The threaded inserts remain in the cross beams.

•

Use fenders with flat assembly surfaces (not included in the scope

of delivery). Place the two parts of the brackets symmetrically in

longitudinal and transverse direction to each other on the assem-

bly surface of the fenders. The bevel must point upward.

•

Use the holes in the brackets as a drill template and drill the

fenders. Screw the components together with the screws MD 100265,

washers MD 110001 & nuts MD 120001.

•

Secure the fender bracket with the threaded inserts MD 100354

and the screws removed at the beginning to the cross beams.

Align the fenders centrally over the running-contact surface of the

wheel. Check if the tyre can move freely and correct as appropriate,

then tighten the screws with the appropriate torque (Fig. 385).

3.9 Completion work

•

Where appropriate, screw the hand grip to the inner right portion of

the frame pillar (Fig. 391).

•

Close the side screw holes on the rear pillar with the supplied plugs

MA150001 (Fig. 392).

•

According to wall-thickness, shorten the inside brackets

MA100068/-69 at the markers. Arrange these according to the

illustrations and fix with the screws MD100057. At the rear, any

preassembled screws must be removed beforehand (Fig. 393-395).

Status 03/2022

Former instructions lose their validity.

in the area of the side doors.

11 / 14