ainenne AIN-US Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Produkty higieny osobistej ainenne AIN-US. ainenne AIN-US 11 stron.

Drukuj stronę

Settings

In order to connect this product to the

Internet and use various functions, it is

necessary to connect this product to a

wireless LAN.

■ Installation

Connect to a power source

• Connect the DC plug of the AC

adapter to the DC input terminal (on

the bottom) of the product and

connect the AC adapter to the power

outlet.

• The operation lamp will light up when

the power is turned on, and the

operation lamp will turn off after

startup is complete.

• This product starts up automatically

when it is connected to a power

source. There is no power switch.

■ Connecting to a wireless LAN

• When you turn on the power for the

first time (if you are not connected

to a wireless LAN), the display will

show the wireless LAN connection

instructions. Follow the

instructions to set up the

connection.

【 Connecting using the wireless LAN Easy

Connection 】

• When connecting to a wireles s

router using the Wireles s LAN

Easy Connection, pleas e do so as

close to the wireless router as

possible.

Press the Settings (

and select "Wireless LAN Settings" >

"Wireless LAN Easy Connection".

Within 60 seconds, press the WPS

button on the wireless LAN router.

You may also see "AOSS", "Easy

Wireless Start", or "Wireless Settings

【 Connecting by specifying the SSID 】

■ Initialization

【Setting the alarm】

• When you set an alarm, the light will

) button,

• You can set the alarm to sound at the

• Press the light on button (

Button".

When you see the message "You have

successfully connected using the

wireless LAN Easy Connection," the

connection is complete.

Press the setting button (

select ", Wireless LAN Settings" >

"Specify SSID".

Use the ▲▼ buttons to select the SSID

you want to connect to, and then press

the Enter button.

This product should be connected in the

2.4GHz frequency band.

Enter the password and press the

Enter button.

• Set the password by using ▲◀▶▲

buttons while watching the screen.

If you are using a computer that has an encryption

key, you will need to use the "encryption key",

"security key", "network key", or even "WEP key" or

"WPA key" depending on the encryption standard.

When the message "Successfully

connected" is displayed, the connection is

complete.

gradually brighten according to the time

you set.

time when the brightness is at its

maximum.

alarm sound.

), and

) to stop the