Alutech Sun Shield EM3430L Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria Alutech Sun Shield EM3430L. Alutech Sun Shield EM3430L 13 stron. Retractable awning
Drukuj stronęDrawing 7:
The pitch angle can be adjusted on all arms
in the adjusting area (7.1).
Take off the plastic caps, loosen the locking
bolts 9 with a 14mm wrench.
Turn the adjusting screw clockwise to
decrease the pitch angle; turn counter-
clockwise to increase the pitch angle. When
achieved to the desired pitch angle, tighten
the safety nuts and put the plastic caps
back on it (7.2).
Follow the same procedure until all arms have been adjusted to the desired level.
The front bar must always be level. To ensure that both sides are completely level, a built-
in level is located on the front bar: the air bubble must be exactly in the middle of the level.
Place the plastic caps on the screws to protect them against weather basedcorrosion.
Always remove the crank handle and keep it in a safe and dry place.
Extend and retract the awning
The awning can be extended and retracted by a crank handle included in delivery or remote control.
Drawing 8.1:
Insert the handle in the loop that is
fixed at the awning. Open the awning
by turning the crank handle clockwise.
By turning it counter-clockwise you
can retract theawning.
8.1
9