DLI DLM-4 ZONE Podręcznik - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik dla Kontroler DLI DLM-4 ZONE. DLI DLM-4 ZONE 19 stron.

DLI DLM-4 ZONE Podręcznik

7.5 Zone Status Page

Once the DLM-4 Zone Controller has been installed and all settings
have been entered, the DLM-4 Zone Controller will constantly monitor
the air temperatures, ballast status and current Day or Night status
within each of the lighting zones.
The measured temperatures are displayed on the Zone status menu
which also displays the current status of the DLM-4 Zone Controller
controlled zones.
Zone 1
1000W67.2F
Restrike
09:03
Zone 2
---.-F
Restrike
09.03
Zone 3
---.-F
Restrike
09:03
Zone 4
---.-F
Restrike
09:03
03/08/2017
The Zone Status menu will be displayed unless there is an event /
error that occurred. If an event is being displayed, pressing Enter will
acknowledge the event / error, and reset the event log.
Pressing the Menu button from the Zone Status menu will access the
Main menu.
*NOTE:
When one temperature sensor is assigned to more than one
zone, that temperature sensor will display it's information within ALL
zones that it is assigned to.
18
DLM-4 ZONE
Controller
7.6 Temperature Min-Max Page
Pressing the Find button on the DLM-4 Zone Controller will access
some important functions. The first page that will be displayed is the
Temperature Minimum-Maximum page.
Each of the temperature sensors installed will constantly measure the
temperature and record the maximum (high) and minimum (low)
temperatures.
These recorded temperatures can be used to confirm that the cooling
/ heating systems inside the growing area are working properly.
The Min-Max recorded values will also verify that the growing area was
not subjected to damaging high temperatures above the DLM-4 Zone
Controllers dimming setpoints.
Once the recorded values have been viewed, the user can easily reset
the values (each day) by pressing the Enter button. Pressing Enter will
rest the recorder values and begin to store new values that can be
viewed the next "day".
Zone 1
Zone 2
Zone 3
Zone 4
Max
68.1
F
Min
66.9
F
Max
---.-
F
Min
---.-
F
Max
---.-
F
Min
---.-
F
Max
---.-
F
Min
---.-
F
ENTER to Reset
DLM-4 ZONE
Controller
19