Alvarion BreezeNET BU Instrukcja szybkiej instalacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Bezprzewodowy punkt dostępowy Alvarion BreezeNET BU. Alvarion BreezeNET BU 9 stron.
Drukuj stronęParameter
ATPC Option
Tx Control (BU)
Antenna Gain (units
with external
antenna)
Best BU Support
(RB)
Preferred BU MAC
Address (RB)
Link Distance Mode
(BU)
Maximum Link
Distance (BU)
Maximum Modulation
Level (RB)
VLAN ID-
Management
Authentication
Algorithm
Data Encryption
Option
Security Mode
Default Key (RB)
Default Multicast Key
(BU)
Key 1 to Key 4
4. Reset the unit to apply the changes.
Aligning the Antennas
1. Point the antenna of the BU towards the direction of the RB, and
vice versa.
2. Verify that the power indication of the unit is on. Verify that the
W-LINK LED of the ODU is on, indicating wireless link
connectivity. If the W-LINK LED is off, check that the ESSID and
Frequency parameters are correctly configured. If necessary,
increase the transmit power level to its maximum value. If the
units are still not associated with each other, try to improve the
quality of the link by changing the direction of the antenna or by
placing the antenna at a higher or alternate location.
Default
Enable
On
According to
the antenna
supplied with
the unit and
the Sub Band.
Disable
00-00-00-00-
00-00 (none)
Automatic
0 (No
Compensation)
8
65535
Open System
Disable
WEP
Key 1
Key 1
00...0 (32
zeros = no
key)
- 5 -
Comment
If set to "Not Set Yet",
must be configured
according to actual
value, taking into
account cable's
attenuation
(otherwise the unit
will not transmit).
Applicable only when
Best BU Support is
enabled
Availability of security
parameters depends
on support according
to the country code.