DLS CRUISE CRPP-BMW1.4 Podręcznik użytkownika - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Samochodowy system stereo DLS CRUISE CRPP-BMW1.4. DLS CRUISE CRPP-BMW1.4 20 stron.
Drukuj stronę6
5
4
Remove the door panel. Start on the inside. Use
a PRY tool. Insert the PRY tool behind the panel
and carefully bend the tool towards you. If your
car has a lock pin (6), make sure to remove it
before lifting the door cover.
There are several electric and mechanical
connectors on the backside of the door panel.
Disconnect the cables to the door handle,
speaker, window control and door light.
Removing speaker
The speakers are either mounted in the door
panel or in the steel door frame.
Use a size 8mm or 10mm wrench to remove the
three bolts that are holding the speaker. Save the
bolts for later assembly.
Speakers mounted in the door frame are fixed
with T20 screws. Save the screws for later
assembly.
1
2
3
Assemble DLS speaker
The DLS CRPP-BMW1.4 Custom upgrade kit
is suitable for most BMW and MINI-models.
The kit contains many different parts, read the
compatibility list on page 15, to see what
configuration that fits your car.
On the following pages, you will find a guide on
how to assemble the speaker to make it fit your
car. Be careful when assembling, take your
time and do no rush. All included parts will not
be used.
The speaker models are called A1, A2 & B1
Included parts
Plastic adaptor
Steel adaptor
Rubber gasket
(118x1.5mm)
Foam gasket
(115x13mm)
Foam gasket
(115x4mm)
EVA gasket
(102x1.5mm)
EVA gasket
(97x1mm)
Screws
(M3)
Cable connectors
(20cm Extension)
A1, A2
B1
A1
A2
A1, A2
B1
A1, A2, B1
A1, A2, B1
A1
4