aion IBEX Podręcznik - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik dla Pedał muzyczny aion IBEX. aion IBEX 10 stron.

1 Project Overview

2 Introduction & Usage

INTRODUCTION

The Ibex Silicon Fuzz is based on the AF-100 Bee Baa, Roland's first fuzz pedal from 1972, the same year

they were established as a company.

The "Bee Baa" name presumably comes from the two tone settings: a mid-scooped buzz that sounds

like a swarm of bees, and a softer-edged tone that might evoke sheep, though you may need the help of

some of the fashionable hallucinogenics of the decade in order to get there.

There were a lot of Japanese products in the 1970s that had poorly-chosen English names, but the

Bee Baa stands tall as one of the worst. Along with along with "Funny Cat" and "Bee Gee", this likely

contributed to Roland's failure to get a foothold in the United States during their first couple of years.

Regardless, the Bee Baa is a classic fuzz, and original units command high prices today. In addition to the

searing fuzz tones, it also has a treble-emphasized boost mode with its own volume control, so it can be

used as a two-channel effect. The boost mode is capable of some grit, but is nowhere near a dirty treble

booster like the Rangemaster.

The Ibex is a direct clone of the Bee Baa, shrunk down to fit in a 125B enclosure but including a

secondary footswitch to toggle between boost and fuzz modes. The Tone Select footswitch has been

changed to a toggle since it's not a good application of a footswitch, but otherwise everything is exactly

as it is in the original unit. An internal midrange trimmer has also been added to dial back the mid scoop.

USAGE

The Ibex has four controls, a toggle switch and a second footswitch:

• Sustain controls the input level of the effect in fuzz mode.

• Boost Level controls the input level of the effect in boost mode, and also acts as the volume control

in this mode.

• Tone is a low-pass filter that cuts highs. It comes after the tone switch and impacts both modes.

• Volume is the overall output of the effect in fuzz mode.

• Tone Select (toggle) selects between two different tone modes. "Bee" mode is a steep mid-scoop

while "Baa" mode is warmer and more balanced.

• Boost (footswitch) selects between boost mode and fuzz mode. In boost mode, the second and third

transistor stages and the tone-shaping section are switched out, leaving only the first transistor

stage which acts as a semi-clean boost with treble frequency emphasis.

IBEX SILICON FUZZ

10 Licensing

TABLE OF CONTENTS