DNF Controls 4000CL-L-T Podręcznik użytkownika - Strona 15

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler DNF Controls 4000CL-L-T. DNF Controls 4000CL-L-T 19 stron. 400 clip fast access system using louth protocol

Drukuj stronę

13. FUNCTION TABLE

Function

Key Press

ENTER

[SHIFT] +

RECORD

[RECORD]

LENGTH

FFWD

[FFWD]

GANG

[SHIFT] + [VTR #1]

[SHIFT] + [VTR #2]

[SHIFT] + [VTR #3]

[SHIFT] + [VTR #4]

GO TO

[SHIFT] + [RECUE]

ENTERED

TIME

JOG

[JOG]

LAST CUE

[LAST CUE]

NEXT CUE

[NEXT CUE]

RECORD

[REC]

REWIND

[RWD]

SHUTTLE

[SHUTTLE]

SLOMO

[SLOMO]

SLO-MO

[SHIFT] + [SLOMO]

SPEED

PRESET

STOP

[STOP]

TIME MODE

[TIME MODE]

SELECT

4000CL-L, Vs.2.1, 400 Clip Fast Access System, Louth Protocol

Enter the desired record length using the numeric keypad.

Press [ENTER] to accept.

Press and HOLD to shuttle. Release key to stop. Set WIND Speed in MENU.

Individually press the VTR keys to be included in the gang; the LED above the

key will turn on. Press the VTR key again to remove from gang; the LED

above the key will turn off. Press [ESC] to exit.

The VTR LEDs that are on show the gang.

The flashing LED shows which VTR is currently selected.

Enter the desired recue time using the numeric keypad.

Press [ENTER] or [RECUE] to reload the currently loaded clip at the entered

time.

Select JOG mode and enable Wheel.

Step to the previous Cue Point Location.

Step to the next Cue Point Location.

Places VTR into the Record mode selected by RECORD MODE in the SETUP

MENU. Press [RECORD] or [RECORD] + [PLAY].

Press and HOLD to shuttle. Release key to stop. Set WIND Speed in MENU.

Select SHUTTLE mode and enable Wheel.

Press [SLOMO] to slo-mo the VTR. Turn the Wheel to change the play speed.

Press [SLOMO] to STILL the frame.

Press any transport key to exit SLOMO.

For WHEEL ONLY: Press [SHIFT] + [SLOMO] to preset the slo-mo speed.

Turn the Wheel to select desired speed.

Press [ESC] or any transport key to exit.

Press once to STILL frame VTR.

Press to toggle between:

Remaining time (RT)

OR Elapsed time (ET).

Description