DNF Controls 4000CL-O Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kontroler DNF Controls 4000CL-O. DNF Controls 4000CL-O 19 stron. 400 video clip fast access system with odetics protocol
Drukuj stronęVIEW THE IN (OUT) POINT
b.
1)
2)
c.
CLEARING AN IN (OUT) POINT
Press and hold [DEL] then press and release [IN] ([OUT]). The IN (OUT) indicator
turns off.
ENTER PREROLL VALUE
d.
1)
2)
3)
EXECUTE CAPTURE FUNCTION
e.
1)
2)
3)
10
4000CL-O, 400 Clip Fast Access System, Odetics Protocol
When the IN (OUT) indicator is on, Press [IN] ([OUT]) to view the existing IN
(OUT) Point.
While viewing the IN (OUT) Point:
Press [MARK] to overwrite the saved time with the current time.
Press [RECUE] to search to the IN (OUT) point.
Press [MENU] and turn the Wheel to "Enter PREROLL:"
Enter the desired preroll value using the ST300's numeric keypad.
Press [ENTER] to save the entered value OR [ESC] to exit without saving.
Press VTR[2], VTR[3], or VTR [4] to select the source VTR.
Press [SHIFT] + [RECORD]. The display will prompt you for a CLIP ID. A
default CLIP ID will be shown.
Press [LOAD] to accept the default CLIP ID
OR
Use [NEXT CUE], [LAST CUE] and Wheel to edit the CLIP ID. Use the
[NEXT CUE] and [LAST CUE] keys to position the cursor. Turn the Wheel to
select the desired letter.
OR
Manually enter a numeric ID using the numeric key pad.
Press [LOAD] to accept the CLIP ID. The ST300 will create the new CLIP ID
on the Video Server.
The Source VTR will preroll to the IN Point, then play. At the source VTR's IN
point, the RECORDER will go into record.
At the Source VTR's OUT point, the RECORDER will terminate record, post-
roll for 2 seconds, then stop.
The Source VTR will search to the OUT point and stop. The OUT point will be
cleared. The IN indicator will stay on. The OUT indicator will turn off.