DNF Controls SW32PS-RCP Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Panel sterowania DNF Controls SW32PS-RCP. DNF Controls SW32PS-RCP 17 stron. Rs422 port switcher remote control panel

Drukuj stronę

5. OPERATION

a.

MAKE A ROUTE

1)
2)
3)
4)
NOTE: No Route is made until [TAKE] is pressed.
NOTE: The Route that involves the selected FROM and/or TO will be
disconnected prior to making the new route.
b.

VIEW THE ROUTES

1)
2)
c.

DISCONNECT ROUTE

1)
2)
3)
4)
5)
d.

SAVE PRESET

1)
2)
3)
e.

RESTORE PRESET

1)
2)
3)
SW32PS-RCP Port Switcher Controller
Press [FROM]. The FROM indicator will turn on. The left side
of the display shows the currently selected FROM connector
(PORT1-32).
Turn the Wheel until the desired FROM point is displayed.
Press [TO]. The TO indicator will turn on. The right side of the
display shows the currently selected TO connector (PORT1-32).
Turn the Wheel until the desired TO point is displayed.
Press [TAKE] to route the FROM input to the TO output.
Press [VIEW]. The VIEW indicator will turn on.
Turn the Wheel to scroll through all ports that are displayed on
the first line of the display.
Press [FROM].
Turn the Wheel until OFF is displayed.
Press [TO].
Turn the Wheel to find the destination that you wish to turn off.
Press [TAKE] to turn off the route.
Press [SHIFT] + [PRESET]. The PRESET indicator will turn
on. The first line of the display will show "Save Preset 1".
Turn the Wheel to select preset number 1-8.
Press [TAKE] to save current configuration into the selected
preset.
OR
Press [ESC] to exit without saving.
Press [PRESET]. The PRESET indicator will turn on.
The first line of the display will show "Restore Preset 1".
Turn the Wheel to select preset number 1-8.
Press [TAKE] to restore selected preset.
OR
Press [ESC] to exit without restoring.
Page
5
o
f
1
3
5
o
f
1
3