Aion Electronics Flare Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Pedał muzyczny Aion Electronics Flare. Aion Electronics Flare 6 stron. Fuzz factory
Parts
Capacitors
C1
10uF
electro
C2
100n
C3
10uF
electro
C4
10uF
electro
C5
47uF
electro
C6
18n
C7
100n
C8
10uF
electro
Build Notes
You can use either germaniums or silicons here. The original uses germaniums AC128s. You can buy
1
Fuzz Factory sets on eBay (I recommend eBay seller
Face set from either eBay or Small Bear Electronics. For silicons, use 2N3906 or comparable PNPs. This gives
a very different character than germaniums. There are plenty of people who actually prefer this version.
This resistor sets the maximum setting of the "Soft" knob. You can probably drop it down a ways before
2
the maximum position cuts out, but 150k is inside the safe zone.
Starting control settings
The Fuzz Factory is a very fun but very glitchy beast. If you fire it up for the first time with the knobs in random
positions, you may be very disappointed in what you hear. Use these positions as a starting point. (1-10 scale)
Drive: 5
Comp: 2
Stability: 10
Soft: 0
Tone: 10
Additional Part Notes
• Capacitors are shown in nanofarads (n or nF) where appropriate. 1000n = 1uF. Many online suppliers do
not use nanofarads, so you'll often have to look for 0.047uF instead of 47n, 0.0056uF instead of 5n6, etc.
• The PCB layout assumes the use of film capacitors with 5mm lead spacing for all values 1nF through
470nF. I prefer
EPCOS box film
• Pots are 9mm Alphas. These mount directly to the PCB. See page 4 for the recommend method for fitting
and soldering all of these.
FUZZ FACTORY / FLARE FUZZ
Resistors
R2
R3
R4
R5
R6
R7
LEDR
RPD
elebcz
Volume: 3
Gate: 0
Body: 2
or
Panasonic
ECQ-B/V-series.
10k
47k
470R
5k1
220k
150k
2
4k7
2M2
from Slovakia) or you can buy a standard Fuzz
Semiconductors
Q1
2N3904
Q2-Q3
PNP (Ge or Si)
D1
1N4002
LED
5mm LED
Potentiometers
Drive
10kB
9mm
Level
5kB
9mm
Comp
10kB
9mm
Stability
10kB
9mm
Gate
10kB
9mm
Soft
100kB
9mm
Tone
10kB
9mm
Body
100kB
9mm
1
2