Do-All Outdoors RAV1 Montaż i obsługa - Strona 4

Przeglądaj online lub pobierz pdf Montaż i obsługa dla Sport i rekreacja Do-All Outdoors RAV1. Do-All Outdoors RAV1 4 stron. Auto trap
Również dla Do-All Outdoors RAV1: Instrukcja montażu (2 strony)

Drukuj stronę
WARNING: PLEASE READ ALL SAFETY GUIDELINES BEFORE OPERATING TRAP:
SAFETY WARNINGS:
• While not in use or when adjustments to the trap need to be made: Always "DISARM" the trap by moving
the toggle switch to the "DISARM" position and depress the foot pedal. This move the arm to the twelve
o'clock position and will relieve spring tension.
• Never let the trap sit unattended while cocked.
• If The main spring is attached, the unit is considered armed and extreme caution must always be used.
• Always stand only behind unit. Not to either side.
• Always wear proper eye and ear protection.
• The safety ring is a visual indicator only for the path of the throwing arm. Do not penetrate this area when
unit is armed.
• Never attempt to work on or alter the unit when main spring is under pressure, unit is in the cocked posi-
tion, or when unit is connected to the battery.
• Always disarm trap and disconnect from battery when not in use. You may choose to remove the main
spring at this time.
• Never place any part of body near the throwing arm or inside the safety ring when the unit is cocked or
connected to the battery. Do not attempt to hand load clays onto arm
• Never let the trap sit unattended while cocked. Always "DISARM" unit first.
• Always be aware of what lies beyond your target and shoot in a safe direction.
DO-ALL TRAPS, LLC DBA DO ALL OUTDOORS, LLC DOES NOT ACCEPT ANY RESPONSIBILITY FOR
DAMAGES AND/OR INJURY SUSTAINED FROM THE USE OR MISUSE OF THIS PRODUCT.
TROUBLESHOOTING:
• If you trap is having issues with timing or the clays not dropping properly, this can be fixed by adjusting the
limit switch at the rear of the trap. If the arm is stopping too early, move the limit switch to the left. If the arm
is stopping too late. Move the limit switch to the right. Before performing these adjustments, always "DIS-
ARM" unit and disconnect from battery.
• If clays are not dropping flush onto the arm, then check that the feeder brushes are not bent in a way that
interfere with the clay dropping through the hole.
• To keep you trap working properly, always keep it clear of debris and well lubricated.
• If the throwing arm should make contact with any object while throwing a clay, it will blow the fuse located
in-line underneath the trap where the battery cables go in.
• If you have a blown fuse, there are two replacement fuses inside box.
• If you are unable to make corrections in the field, or if unit is not operating properly, please Contact
1-866-SHOTDOC For Assistance.
Do-All Outdoors, LLC. prides itself on its customer service. Please contact us if you have any issues
with our product.
DO NOT RETURN TO STORE
Customer Service: 1-866-SHOT-DOC
www.doalloutdoors.com
Made In China
Printed In China
4