DockCraft DockSider WS200 Instrukcja montażu, instalacji, konfiguracji i obsługi
Przeglądaj online lub pobierz pdf Instrukcja montażu, instalacji, konfiguracji i obsługi dla Sprzęt żeglarski DockCraft DockSider WS200. DockCraft DockSider WS200 13 stron.
Drukuj stronęAssembly, Installation, Setup, and Operating Instruction
- Tool Free Dock Mount Models; Series 200 -
Holds Kayaks / Paddleboards up to 125 pounds.
•
•
For Docks with Wood, Composite Wood, Vinyl, and Aluminum Decking.
Must have Dock side boards less than 7 ½ inches. Truss Docks 10
•
inches.
•
Designed for standard dock decking thickness of up to 1 ½ inches.
•
The underside of your dock Must be accessible.
Model DS200 – Aluminum Dockside Operation
•
Operates from the Dockside Only.
•
Holds your Kayak / Paddleboard 5 to 17 inches below the dock surface.
•
Accommodates Freeboard (Dock Surface to Water Level) height up to 36 inches.
Model WS200 – Aluminum Waterside Operation
•
Operates from the Waterside Only.
•
Holds your Kayak / Paddleboard 5 to 17 inches below the dock surface.
•
Accommodates Freeboard (Dock Surface to Water Level) height up to 36 inches.
Please read these instructions carefully before using this product and save this
manual for future use.
For assistance, please call: 585 – 734 – 7374
Or send email to: [email protected]
"The DockSider"
OM200 - 012721
A Kayak / SUP Lift and Dock Storage Rack
DockCraft Industries LLC
3694 Nibawauka Beach
Canandaigua, New York 14424
Patented
Page 1 of 13
TM