Fleetwood ESB-SUPER Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia kuchenne Fleetwood ESB-SUPER. Fleetwood ESB-SUPER 15 stron.
Drukuj stronę3.3.5 Cautions with Stainless Steel:
The Stainless Steel may present rust signs, which ARE ALWAYS CAUSED BY
EXTERNAL AGENTS, especially when the cleaning or sanitization is not constant and
appropriate.
The Stainless Steel resistance towards corrosion is mainly due to the
presence of chrome, which in contact with oxygen allows the formation of a very thin
protective coat. This protective coat is formed through the whole surface of the steel,
blocking the action of external corrosive agents.
When the protective coat is broken, the corrosion process begins, being
possible to avoid it by means of constant and adequate cleaning.
Cleaning must always be done immediately after using the equipment. For
such end, use water, neutral soap or detergent, and clean the equipment with a soft cloth or a
nylon sponge. Then rinse it with plain running water, and dry immediately with a soft cloth,
this way avoiding humidity on surfaces and especially on gaps.
The rinsing and drying processes are extremely important to prevent stains
and corrosion from arising.
Acid solutions, salty solutions, disinfectants and some sterilizing solutions
(hypochlorites, tetravalent ammonia salts, iodine compounds, nitric acid and
others), must be AVOIDED, once it cannot remain for long in contact with the
stainless steel:
These substances attack the stainless steel due to the CHLORINE on its
composition, causing corrosion spots (pitting).
Even detergents used in domestic cleaning must not remain in contact with
the stainless steel longer than the necessary, being mandatory to remove it with plain water
and then dry the surface completely.
Use of abrasives:
Sponges or steel wool and carbon steel brushes, besides scratching the
surface and compromising the stainless steel protection, leave particles that rust and react
contaminating the stainless steel. That is why such products must not be used for cleaning
and sanitization. Scrapings made with sharp instruments or similar must also be avoided.
Main substances that cause stainless steel corrosion:
Dust, grease, acid solutions such as vinegar, fruit juices, etc., saltern
solutions (brine), blood, detergents (except for the neutral ones), common steel particles,
residue of sponges or common steel wool, and also other abrasives.
05
IMPORTANT
5. Análise e Resolução de Problemas
5.1 Problemas, Causas e Soluções
Los la Exprimidora de Cítricoa Mod. ESB-SUPER fueran diseñados
para que se necesite un mínimo de manutención. Sin embargo pueden ocurrir
algunas irregularidades en su funcionamiento, debido al desgaste natural causado
por su uso.
Caso haya algún problema con su maquina, verifique la Tabla – 02 abajo,
donde están indicadas algunas soluciones recomendadas.
Problemas
* La maquina no prende.
* Falta de energía eléctrica.
* Problema en el circuito
eléctrico interno o externo de
la maquina..
* La corona gira, pero cuando
El encaje de la circuito eléctrico
entra en contacto con el
interno o externo de la
producto la misma para.
máquina.
* Falla en el transporte del
* Cable eléctrico dañado
producto
5.2 Diagrama Eléctrico Mod. ESB-SUPER
Llave Prende/Desliga
Tabla - 02
Causas
Soluções
* Verifique si la enchufe está
conectada al soquete y si
hay energía eléctrica en la
red eléctrica.
* Llame a la asistencia
técnica.
* Cambie la corona
* Llame a la asistencia
técnica.
Motor
18