ETA Systems PD11VBC Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Dystrybucja zasilania AC ETA Systems PD11VBC. ETA Systems PD11VBC 8 stron. Power protection series

Drukuj stronę

INTRODUCTION

Your Audio/Video components are constantly

High-Current Outlet Bank:

being bombarded by electromagnetic interfer-

The unique power requirements of current

ence (EMI) and radio frequency interference

hungry components such as amplifiers and

(RFI) through their power cords. This contam-

powered subwoofers are also addressed.

inated power can affect A/V equipment and will

These components can rapidly draw large

degrade the overall performance of your entire

amounts of current to replenish their power

system. Common symptoms of contaminated

supply capacitors after thunderous bass notes.

power include pops, hisses, hums, visual arti-

Line conditioners that utilize coils (inductors)

facts, etc. Most power filtering devices will

in series with the AC power line can "choke"

remove some of this interference but don't

off this large inrush current, thereby reducing

provide a real solution to the problem.

the amplifiers' ability to operate at peak

performance levels, resulting in a flat, dead

The PD11VBC Sophisticated Filtration

sound. The PD11VBC high-current outlets

System is a Real Solution!

are fed by noise filtration circuitry that does

not utilize coils and provides full, unimpeded

Outlet Banks 1 & 2:

power for your amplifiers and powered sub-

The primary filtration system features two

woofers.

banks of independently filtered outlets (4 per

bank) for A/V equipment. These outlet banks

Other Features Enhance the

utilize "Balanced Double L" filter circuits

Functionality:

which are far superior to any other design in

Although the PD11VBC functionality revolves

filtering out all forms of electromagnetic and

around noise filtration and power protection,

radio frequency interference in both common

many other exciting features enhance the overall

and normal modes. Cross-contamination

entertainment experience, including:

between your components is also eliminated

•

A backlit analog voltmeter indicates the AC

with this design. Bank 1 is Always-On,

line voltage coming into your system.

providing continuous power for those compo-

nents that have programmable memory

•

A combination ON/OFF/Dimmer switch

settings. Bank 2 can be set to either

controls the meter lighting.

Always-On or switched with a shutdown delay.

•

An always-on, convenience outlet on the

front panel for temporary AC connections.

•

Sequential start-up and shut-down of your

system using an A/V receiver (or other

component) and the 12VDC trigger input.

1532 Enterprise Pkwy, Twinsburg OH 44087 • (800) 321-6699 • (330) 425-3388 • www.etasys.com

As you read through the rest of this manual,

you'll discover many more unique features.

As audiophiles, we care about the quality of

your listening and/or viewing experience.

Our goal is to:

• Provide clean pure power

• Protect your investment

• Enhance the pleasure you get from you're

A/V system

Thank you for choosing ETA for your power

quality needs. Please finish reading the

instructions, install your PD11VBC and enjoy

the full potential of your entertainment sys-

tem.

TECHNICAL SPECIFICATIONS

GENERAL

Dimensions..........................17" W x 12" D x 3.5" H, (4.1" Including Feet)

Weight.............................................................................................16 lbs.

AC CIRCUIT

NOISE FILTRATION:

Filtered Outlet Banks........................................................55 dB (100 KHz - 1 MHz)

High-Current Outlets.......................................................50 dB (100 KHz - 1 MHz)

SURGE PROTECTION:

UL 1449 Surge Suppression Rating................................................................330V

Protection Modes....................................................................... L - N, L - G, N - G

Initial Clamping Level..........................................................200V Peak, 141V Rms

Response Time...............................................................................................<1ns

Joule Rating........................................................................................1790 Joules

Peak Impulse Current...............................................................................65,000A

Catastrophic Surge Circuit ..............................................................................YES

AC:

Line Voltage...............................................................................................120VAC

Max Current Rating......................................................................15A (1800 Watts)

Thermal Fuse...................................................................................................YES

Over/Under Voltage Protection.........................................................................YES

Over-voltage shutoff threshold..................................137±4 VAC, 10 Milliseconds

Under-voltage shutoff threshold...............................95±4 VAC, 500 Milliseconds

Design and specifications subject to change without notice due to product improvement.

CONTACTING ETA

For product and warranty information, dealer information, and other general information contact

Customer Relations at:

• Email: [email protected]

• www.etasys.com

• Fax 330-425-9700

• 800-321-6699 or 330-425-3388, 7:30 a.m.- 5:30 p.m. EST

1532 Enterprise Pkwy, Twinsburg OH 44087 • (800) 321-6699 • (330) 425-3388 • www.etasys.com

DC TRIGGER

Connection........................................................................3.5mm mono mini-plug

Voltage and Polarity............................................3-18VDC nominal, bi-directional

Current Requirement.....................................................................................25mA

SATELLITE CIRCUIT

Clamping Level................................................................................................27V

Attenuation...............................................................<1 dB from 950MHz - 2.2GHz

Shielded...........................................................................................................YES

Connections......................................................................Gold plated, Female "F"

ANT/CATV CIRCUIT

Clamping Level...............................................................................................0.7V

Attenuation..................................................................<1 dB from 5MHz -950MHz

Shielded...........................................................................................................YES

Connections......................................................................Gold plated, Female "F"

TELEPHONE CIRCUIT

Clamping Level..............................................................................................260V

Capacitance......................................................................................30pf (approx.)

Suppression Modes...........................................................Metallic & Longitudinal

Wires Protected....................................................................2 wire/ 1 pr. (pins 4,5)

Fuseless/Auto-Resetting..................................................................................YES

Connections............................................................................................RJ-11/45