Doctor-San 1033 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Grzałka Doctor-San 1033. Doctor-San 1033 7 stron.

Use

• Position the fan heater so that it stands upright on a firm surface and at a safe distance from

wet environments and flammable objects.

• Connect the fan heater to the mains.

• Set the thermostat dial to the maximum temperature.

• The fan heater will switch on when the function selector is set to one of the three power

settings.

• Once the room reaches the required temperature, you should turn the thermostat dial slowly

counter-clockwise until the fan heater switches off. The fan heater now starts and stops

automatically and thus keeps the room temperature constant.

Cleaning and maintenance

。Before cleaning the appliance, disconnect it from the socket and let it cool down.

。The enclosure is easily to get dirty, wipe it often with soft sponge. For very dirty parts, wipe

with a sponge dipped in < 50℃ water and mild detergent, then dry the heater enclosure with

clean cloth. Be careful not to let the water enter the appliance inner.

。 Don't splash water onto the heater， never use solvent like gasoline, isoamyl acetate, toluene

etc to clean the heater, in order to protect the enclosure.

。Clean the coupler, dry and pack it in a plastic bag.

。When you store the heater, let it cool down first, keep it dry. Then cover it with a plastic bag,

put in the packing box and store it in a dry, ventilated place.

Correct Disposal of this product

This marking indicates that this product should not be disposed with

other household wastes throughout the EU. To prevent possible harm to

the environment or human health from uncontrolled waste disposal,

recycle it responsibly to promote the sustainable reuse of material

resources. To return your used device, please use the return and collection

systems or contact the retailer where the product was purchased. They can take

this product for environmental safe recycling.

MF Trading GmbH

doctor-san® Sanierungstechnik

Ferdinand-Porsche-Straße 6

82205 Gilching

Tel.: 08105 730 50 58