DocuPen DocuPen RC800 Series Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Skaner DocuPen DocuPen RC800 Series. DocuPen DocuPen RC800 Series 16 stron. Portable scanner

Drukuj stronę

Scan mode - Profile Configurator

You can setup the exact values of the color and resolution modes, using the interactive

Profile Configurator dialog box. The Profile Configurator dialog is part of the

DocuPen Scanner Control window and can be started by selecting the Open Profile

Dialog.. from the pull-down menu in the DocuPen Scanner Control window.

In the Profile Configurator dialog you can choose from: (See table on following page)

DocuPen Operation Manual 20

Scan mode - Profile Configurator (continued)

Mono Mode

Color Depth

Mono [b/w 1Bpp]

Grayscale [4Bpp]

Grayscale [8Bpp]

Standard

100 or 200 dpi

Resolution

Hi Resolution

200 or 400 dpi

You can select the desired values from the corresponding pull-down menus in the

Profile Configurator dialog. When desired selection is completed, you can press the

Set button. You will be prompted to turn the DocuPen ON and then the values will be

transferred to the DocuPen.

Note:

Your DocuPen must be

You can also check the current values in your DocuPen by selecting the Get button.

You will be then prompted to turn the DocuPen on and then the value will be displayed

in the corresponding cell.

By clicking the Default button the values will be automatically set to:

Mono Mode

Color Depth

Mono [b/w]

Standard

200 dpi

Resolution

Hi Resolution

400 dpi

Note:

You must click on the Set button after every manipulation of the

data. Only then will the data be transferred and saved into the DocuPen!

When desired color and resolution values are set and uploaded to DocuPen you can

close the Profile Configurator dialog. Click the Close button within the Profile

Configurator dialog box and resume your scanning operation.

DocuPen Operation Manual 21

Standard Color

Hi-Color

Document Mode

Photo Mode

Docu Color [12bit]

Photo Color [24bit]