FLENDER FASTEX EC220 Instrukcja montażu i obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja montażu i obsługi dla Urządzenia przemysłowe FLENDER FASTEX EC220. FLENDER FASTEX EC220 17 stron.

5 Disassembly

Procedure

1. unscrew all hexagon head screws (6) one after the other. These must not be unscrewed

2. f the rear conical ring (1) and the front conical ring (3) do not loosen, apply pressure at

3. Remove the clamping set with the hollow shaft/hub (5) from the shaft (4). Use suitable

4. Remove the clamping set from the hollow shaft/hub (5). Use suitable lifting devices for

When reinstalling the clamping element please observe the information in the chapter

Assembly (Page 10).

FASTEX EC220 Clamping element 3911de

Compact assembly and operating instructions 05/2022

completely.

several points around the circumference of the conical rings.

lifting devices for this purpose.

this purpose.