DOD LS400W Instrukcja instalacji sprzętu
Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Kamery samochodowe DOD LS400W. DOD LS400W 2 stron.
Drukuj stronę
Product Structure
Hardware Installation Guide
Thank you for purchasing Our company product,
please following the instruction to use the device
correctly.
Our company products are made of top materials to
provide the best quality product with the best image
quality to all customers.
Recording notes
1. Recording in a car without film on windshield can ensure the
best image recorded.
2. Please keep the windshield clean to prevent bad influence
on image quality.
3. If windshield wiper can't clean the windshield, please
replace it with a new one, or the image quality in the rainy
day will be influenced.
4. Image quality will be better while recording in a sunny day, but
please note in backlight position the image will be darker, it's
the normal reaction while image sensor face the light straightly.
Installation and Fixation
Power On/Off
Please connect the vehicle cigarette lighter and start the engine, the
device will be switched on immediately.
When car engine stooped or car power disconnected, the device will
shutdown in 10 seconds automatically.
Notes
1.For the users whose vehicle cigarette lighter keeps power
supplying after the engine stopped, please unplug the car
charger before leaving the vehicle.
2.Please use Class 6 or above Micro SD card
Software Operation
1.Please insert the memory card into the SD Card Slot with the
Switch On
specified direction, and then use the bracket to install the device
1.Insert the memory card
inside the car.
2.Connect the car charger into the vehicle
2.When using the bracket, please choose the position carefully. Do
cigarette lighter and the device
not place the device in the position that blocks the driver's sight
3.Start the vehicle.
or affects the work of the airbags.
4.The device be turned on, and start
3.If there is any splotch, fingerprints or other kinds of smudginess
recording automatically.
on the windshield, please wipe clean it before installing.
Recording Settings
Recording image
1
2 3
4
5
After stopped recording, press MENU to enter the recording
settings.
Resolution Set the recording resolution.
：
6
8
Record Cycle Set the video length in recording cycle mode, or
：
7
toggle off record cycle function.
WDR
：
Toggle on the WDR function.
9
EV
Set the exposure value.
：
Motion Detection
：
Toggle on or off the motion detection recording
function.
10
11
12
Standby Image
Sound Recording
：
Toggle on or off the sound recording function.
13
Date Stamp
Toggle on or off the data stamp function.
：
G-sensor
：
Set the sensitivity level of the G-sensor file protection .
1.Recording mode
8.Resolution
2.Recording image
9.Memory Card icon
3.WDR works all time
10.Date
4.SOS file locking
11.Time
5.Recording time
12.Power connected
6.Cycle recording in 3 minutes length
13.Available recording
7.Exposure compensation
length of SD card
System Settings
Video Playback
After stopped recording, press MENU twice to enter the system
Video-Play Operation
setup.
1.After stopped recording, press MODE to enter the video-play
Date/Time
Set
the system time.
mode.
：
LCD screen protection
：
Set the screen automatic off
2.Press UP or Down to select the desired video to play.
time, or set it as always on.
3.Press CONFIRM to start playing video.
LED light
：
Switch on or off LED light function.
4. Press CONFIRM again to pause the video.
Beep
Switch on or off the system beep indicator.
：
Language
：
Support multiple languages; you can choose the
Delete Video
language according to your preferences.
1.After stopped recording, press MODE to enter the video-play
TV Mode
You can toggle between NTSC and PAL when in video
：
mode.
output mode.
2.Press UP or Down to select the desired video to delete.
Frequency
Support 50Hz and 60Hz.
：
3.Press MENU, enter the menu to delete the video or delete all.
Format
：
Format the memory card; please backup your data
before formatting.
Play on Computer
Default Setting
：
Reset all the settings to the default state.
It is recommended to play the video by free software VLC PLAYER.
Version
Check the system version number.
Please go to
http://www.videolan.org/vlc/
：
VLC Player.
Recommended PC requirements for 1080P 30fps video playing:
1.intel Core 2 Duo 2.0GHz or above CPU
2.2G or above DDRII RAM
3.Graphic card supports DirectX 10 or above
to download and install