DOD R410 Series II Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt komputerowy DOD R410 Series II. DOD R410 Series II 13 stron. P.a./monitor processor
Drukuj stronęR410 Manual
6/8/99
10:41 AM
1 0
Specifications
Frequency Response: 10Hz - 30kHz, ±0.5dB.
THD + Noise: < 0.04% @ 1kHz.
Signal to Noise Ratio: Better than 97dB.
Input Impedance: 20kΩ unbalanced, 40kΩ bal-
anced.
Maximum Input Level: +21dBu (ref; 0.775
VRMS).
Output Impedance: 51Ω unbalanced, 102Ω bal-
anced.
Maximum Output Level: ±21dBu.
Thru Output: Hard-wired to input.
Graphic EQ Band Separation: 2/3 Octave.
Notch Filter Q: > 40.
Limiter Attack Time:
Limiter Release Time: Slow 180ms
Low Cut Filter Slope: 12dB/Octave.
Page 10
Slow 18ms
Fast 2ms.
Fast 20ms.