Flepcher FLP-ZS9812 MKII Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt nagrywający Flepcher FLP-ZS9812 MKII. Flepcher FLP-ZS9812 MKII 13 stron. Public address system, zone selector

Drukuj stronę

4. MACHINE OPERATION

1. Panel 1 to 12 buttons and the corresponding channel indicator light after the plate AMP1 ~ 12
and ZONE1 ~ 12.Press the button corresponding to the channel after the board has a
corresponding signal output (in the channel under the premise of an input signal),ALL ZONE
button is pressed, after a 12-channel board can be output (100V).
2. RELAY TRIG signal input short circuit, REPLAY CONT Duanyou short-circuit signal output at the
same time ZONE1 ~ 12 have a 100V output.
3.REMOTE SELECT sequence of Figure PIN interface.
a. REMOTE SELECT after the panel on the left of the PIN1-PIN6
Said control ZONE1-ZON6, PIN1-6 and GND shorted to trigger connected ZON1-6, Input the
corresponding output channel may be communication number, panel indicator light does not
shine panel indicator light does not shine;PIN7-AC and ground shorted all the light does not
shine, ZONE1 ~ 12 have a 100V output. PIN8 and GND shorted, panel lights all the knowledge,
ZONE1 ~ 12 have no output.
b. REMOTE SELECT right after the board of the PIN1-PIN6s aid control ZONE7-ZON12, PIN1-6 and
GND shorted to trigger connected ZON7-12, the input and output channels corresponding to 11 can
be connected, panel indicator light does not shine.
c. PIN7-AC remote region control, PIN7 shorted GND, can be controlled ZONE1-12 District,
signal conduction, but the panel lights are not bright.
d. PIN8-PR force to cut off function, PIN8 shorted GND, can be controlled ZONE1-12 District, the
signal cut off, the panel lights are bright,
PUSH
2
1
MIC
3
OUTPUT LEVEL
-18
-15
-12
-9
-6
-3
0
-18
-15
-12
-9
-6
-3
0
POWER
CHIME
ALL
Note:
The PIN and GND shorted by using a remote control port connected to FLP-PMCE012
control, shown in Figure:
Press the CH1 ~ 12 (rather 2 REMOTE SELECT ports correspond to a short PIN and
access, such as the pressCH1, left REMOTE SELECT to PIN1 and GND shorted, press
CH7, the right side of REMOTE SELECT the PIN1 and GND shorted), corresponding
ZONE1 ~ 12 through the signal (100V),They are independently controlled, that is, at
the same time press the CH1 ~ 12, ZONE1 ~ 12 can be through the signal (through 100V).
Press the ALL button (equivalent to PIN7 and GND shorted), ZONE1 ~ 12 can be accessed
through the signal (100V).
The right side PIN8 can be GND by themselves
12345678
PIN 1-Z1
PIN 2-Z2
PIN 3-Z3
PIN 4-Z4
PIN 5-Z5
PIN 6-Z6
PIN 7-AC
PIN 8-PR
FLP-PMC012
TM
TM
12 ZONES REMOTE PAGING
MICROPHONE
CH1
CH2
CH3
CH4
+3
+6
+9
+3
+6
+9
CH5
CH6
CH7
CH8
TALK
CH9
CH10
CH11
CH12
FLP-ZS9812MKII
8