Clinton 252 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wyposażenie wnętrz Clinton 252. Clinton 252 8 stron. Power mat platform

UNPACKING & SETUP

All Clinton Power Mat Platforms ship fully assembled. However, care should be taken when unpacking the

Platform so as not to damage the equipment.

BEFORE STARTING TO UNPACK THE EQUIPMENT inspect the boxes for damage that may have occurred during

the shipping process. Clinton uses every packaging option available to insure that equipment arrives at its

destination in factory condition, however, Clinton Industries has no control over third party handling once it

leaves our facilities. Report any visible damage to Clinton and the shipping carrier immediately.

After the package is inspected for visible damage, follow the unpacking steps below.

CAUTION:

Do not use a knife or other sharp object that may puncture or damage the upholstery

during the unpacking process.

CAUTION:

Clinton Power Mat Platforms are heavy. Clinton Industries recommends four

reasonably strong individuals using proper lifting techniques be used to lift or move the table.

Not using the recommended number of movers may result in injury to the persons attempting to lift

or move the equipment.

CAUTION:

For optimum performance an patient safety, all Clinton

Power Mat Platforms should be on a clean, level non-

slip surface.

Once the platform is in the desired location, level the

table by adjusting the four leveling feet on the platform.

Turn the feet counter clockwise to decrease the height

and clockwise to increase the height of the leg.

Make certain that the platform is level in all directions

and that it does not wobble or rock.

Always lift the platform by the metal frame.