Etac Molift Nomad Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt medyczny Etac Molift Nomad. Etac Molift Nomad 18 stron.
Drukuj stronę
About the product
Molift NOMAD is a portable ceiling lifter intend-
ed for lifting and transferring persons. The lifter
is made out of light materials and has a battery.
It can be used in institutions with various needs,
making it necessary to move the lifter between
different rooms.
The lifter has intelligent electronics with soft start/
stop, and a counter to register the number of lift
cycles.
Main parts
The lifter consists of a chassis with motor, lifting
belt, electronics and battery. A rail system with a
trolley is necessary for attachment of the lifter. The
lifter has four hooks for attaching the sling with
the user.
The lifter can be attached to the trolley directly, or
by using an attachment arm. This makes it easy to
move between the different rail systems. A climb-
ing strap on the trolley makes it possible to climb
from one rail system to another with a user sus-
pended.
Trolley
Lifting handle
Emergency lowering
Emergency stop
Lifting hooks
Safety devices
Molift NOMAD is equipped with several safety de-
vices, which are intended to prevent personal in-
jury or damage to equipment in the case of incor-
rect use.
• The lifter has an overload sensor which pre-
vents the lifter from lifting too much. If the
weight of the patient is too high, the lifter will
stop.
• The lifting hooks are designed to prevent the
lifting sling from falling off.
• Electrical system has a protection against over-
heating. If the temperature on the circuit card
is too high, the lifter will stop, and you will have
to wait until the temperature goes down.
• The lifter has a sensor which will stop the lifter
if the lifting belt is not tight, to avoid it curling
up.
• The electrical system registers the lifters operat-
ing time, and gives a signal when service is re-
quired.
• The battery lamp will illuminate when the lifter
needs charging, and an audible signal will
sound.
• The lifter features emergency stop and emer-
gency lowering.
Safety hook
Lifting belt
Chassis
Buttons for lifting and
lowering
Battery light and
service light
Hand Control
Page 5 of 20