Akrapovic Slip-on Instrukcja instalacji

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Okap wentylacyjny Akrapovic Slip-on. Akrapovic Slip-on 7 stron. Exhaust system for the kawasaki z1000 2007; kawasaki z1000 2008; kawasaki z1000 2009
Również dla Akrapovic Slip-on: Instrukcja instalacji (14 strony)

Drukuj stronę
Installation instructions:
AKRAPOVIC SLIP-ON & SLIP-ON STREET LEGAL EXHAUST SYSTEM
Congratulations on purchasing an Akrapovi exhaust system. Please read these installation instructions carefully. If
you have any trouble installing the system please contact your authorized dealer!
IMPORTANT INFORMATION
Exclusion of Certain Liability
1.
The manufacturer, importer or dealer shall not be liable for any incidental damage including personal injury or any
other damages caused by improper installation or operation of the Akrapovi exhaust system. When installing the
Akrapovi
exhaust system be careful that the exhaust system does not touch other parts sensitive to high
temperature.
2.
Akrapovi makes no representation or warranties with regard to damage caused by the improper installation, use and
maintenance of the Akrapovi
department and to normal use, and excludes items subject to normal wear (gaskets and damping wool). The
guarantee is void in case of accident, modification, improper or competition use.
3.
Do not attempt to install the Akrapovi exhaust system on a motorcycle for which it was not made or tested by
Akrapovi .
4.
When the exhaust system gets very hot during operation, be careful not to burn yourself on the exhaust system or
parts which are in direct contact with it, even when the motor is not running. Also protect other people, especially
children, from the injuries mentioned above.
5.
In some cases Akrapovi exhaust system kits contain chemical products (ceramic anti-seizing grease; bolt sealant).
Handle with care, do not inhale or swallow. Avoid excessive contact with skin, eyes or mucous membranes. Keep out
of reach of children.
6.
Technical specifications of Akrapovi exhaust systems and related products subject to change without notice.
Trademarks
The Akrapovic Exhaust System Technology logo is a registered trademark of Akrapovi d.d.
Akrapovic website
Information about Akrapovic exhaust systems and related products is available on the Akrapovic website at:
http://www.akrapovic.com/
Copyright
No part of the Akrapovi exhaust system or its documentation may be reproduced or distributed in any form or by any
means without the prior written authorization of the Akrapovi company.
© Akrapovi , d.d. All rights reserved.
Symbols
The following symbols are used throughout these installation instructions:
! CAUTION OR WARNING
USE BOLT SEALANT; Apply 3 to 4 small drops of bolt sealant onto the cleaned and degreased threads before
tightening bolts. WARNING! Avoid contact with skin, eyes and mucous membranes. Do not inhale fumes. Keep
out of the reach of children.
USE ANTI-SEIZING GREASE (white tube); Prevents seizing, corrosion and excessive wear between the titanium
components of your exhaust system. WARNING! Avoid eye contact. Avoid excessive skin contact. Keep out of
the reach of children.
USE ANTI-SEIZE LEAD-FREE COPPER PASTE (black tube); Provides trouble-free and long-lasting protection
against seizing, corrosion and rusting of bolts, threaded ends, nuts, joints, etc. Also protects against vibration, wear
and impact. WARNING! Avoid eye contact. Avoid excessive skin contact. Keep out of the reach of children.
NAV - 322
for the
KAWASAKI Z1000 (2007- 2009)
exhaust system. The warranty is limited to defects recognized by our technical
TOOLS
REQUIRED
INSTALLATION TIP
TIGHTENING
TORQUE
*350539*
1