3M 6200 Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Produkt oddechowy 3M 6200. 3M 6200 2 stron. Half facepiece respirator
Również dla 3M 6200: Instrukcje użytkownika (16 strony), Arkusz danych technicznych (3 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Instrukcje użytkownika (2 strony)

Drukuj stronę

Quick Start Guide

Half Facepiece Reusable Respirators 6100 (Sm)/6200 (Med)/6300 (Lg) and particulate fi lter

™

assembly including: 3M

Filter Adapter 603. Optional 3M

™

6100/6200/6300

Notes:

• Before using these respirator systems, all users must read and understand the product User Instructions.

• Do not use with beards or other facial hair or other conditions that prevent a good seal between the face and

the faceseal of the respirator.

• Perform hand hygiene and use other applicable PPE as determined by your facility and/or infection control

policy.

Step 1: Inspection

Inspect all components according to the product User Instructions prior to each use. Check for cracks,

tears, holes, deformation or missing components.

Step 2: Filter assembly

1. Place the fi lter pad in the

fi lter retainer (501) with

the fi lter print facing up.

Step 3 (optional): EVF Connection to Facepiece

1. Ensure the valve

cover of the 6000

Series facepiece is

clean, uncontaminat-

ed and undamaged.

The valve cover is

on the front of the

respirator and has a

large 3M logo. There

are four breathing

slots surrounding the

logo.

N95 Particulate Filter 5N11, 3M

™

Exhalation Valve Filter 604.

™

603 (x2)

2. Snap the fi lter

adapter (603) into the

fi lter retainer (501).

3. Press the EVF

2. Align the connector

tabs and hooks on the

back of the EVF with

the breathing slots of

the valve cover.

Tip: Installing the

EVF with either hook

at the top position

may help with proper

alignment of the EVF.

Filter Retainer 501 and

™

5N11 (x2)

3. Ensure the fi lter seal is free from creases and gaps and

print is oriented correctly.

4. If the EVF is not

onto the valve

seated evenly on

cover. The EVF

the valve cover, as

should sit evenly on

shown above, in

the valve

Fig. 4, repeat steps

cover.

2 & 3.

501 (x2)

604 (Optional)

5. Slowly rotate the

EVF clockwise until

rotation stops. Pull

outward lightly on

the EVF to confi rm

a complete

connection.

April 2021