Clippasafe 108 Instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyposażenie wnętrz Clippasafe 108. Clippasafe 108 12 stron. Wooden playpen with base mat

Square Conﬁguration

To set up the playpen as a square use only 3 panels and the door.

Unlock the hinge of the door panel (C) and rotate the panel 45° until the square symbol (1) on

the hinge lines up with the square symbol (2) on the adjacent hinge as shown in (b). Secure the

hinge in this position by pushing down on the hinge. Unlock the adjacent hinge of the next

panel and rotate the hinge with the door a further 45° until the square symbols on both hinges

align as shown in (c). Again, secure the hinge in this position by pushing down on it.

To unfold the next panel, unlock the hinge at the other end of the ﬁrst panel and rotate all of

the remaining panels around until the square symbol (1) on the ﬁrst panel lines up with the

square (1) on the hinge of the next panel (d). Secure the hinge in this position.

Unlock the next hinge and rotate the remaining panels around until the square indicators line

up as shown (e). Rotate the last panel until the square symbol (1) on the second panel lines up

with the square symbol (2) on the last panel. Finally release the hinge on the ﬁnal panel and

rotate it until the square symbols line up.

To connect the last panel to the door panel ﬁrst unlock and rotate the outer slat of the door

panel to the square symbol (2). Then unlock and rotate the outer slat of the last panel to the

square (1). Line up the connectors (A) to the corresponding openings on the door (C) and gently

push the two together until they click into place as shown (i). Lock both hinges by pushing

down on the panels, and ﬁnally check that all the other hinges are similarly locked.