Clippasafe 108 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyposażenie wnętrz Clippasafe 108. Clippasafe 108 12 stron. Wooden playpen with base mat

To disconnect or separate the panels from each other, gently pull up on the top connector (A)

and push down on the bottom connector (A). You can now pull the panels apart or pull the

connector free from the hinge. To connect the elements again simply push the connectors (A)

into the top and bottom holes in the panel hinges as shown.

Place the playpen vertically upright on a stable surface.

Each panel has a hinge at each end and the hinges are secured, top and bottom by a

connector (A). To unfold each slatted panel you need to unlock each hinge. To do this,

slide the catch underneath each top corner hinge (1) outwards and gently lift the panel (2)

whilst holding down the adjacent panel. This will allow you to rotate the panel around

the outer slat (3).

To secure each panel again, push down on it ﬁrmly (4) until it locks. You can check that

each panel is locked, by gently trying to rotate it.If it will not rotate, it is securely locked.