DOEPFER A-100 Series Podręcznik - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik dla Kontroler DOEPFER A-100 Series. DOEPFER A-100 Series 6 stron. Analog modular system, connecting the breakout module to the main module
Również dla DOEPFER A-100 Series: Instrukcja obsługi (8 strony), Podręcznik (16 strony), Podręcznik użytkownika (12 strony), Instrukcja montażu i okablowania (6 strony), Podręcznik (8 strony), Podręcznik (8 strony), Łączenie (8 strony)

doepfer

3. Controls

1 Gain

Use control 1 to set the level of input gain for the

speech signal at socket !.

Control 2 is used to increase the level of the high

frequencies in the speech signal input. Often, using

this control makes speech more easily intelligible.

To produce the best results, please also look

at the general instructions (chapter 5) in the

manual for the main vocoder modules, A-129

/1 and A-129 /2.

3 LED

This LED indicator 3 shows the status of the swit-

ching in the voiced / unvoiced detector:

• LED on :

"Unvoiced"

• LED off :

"Voiced"

System A - 100

4. In / Outputs

! Speech Input

The speech signal is patched into Speech-input !.

Speech output " puts out the amplified and equalised

(treble-boosted) speech input signal. This output is

patched to the speech input socket on the A-129 /1

analysis module.

§ Gate Output

Gate output § puts out a gate signal, depending on

the status of the voiced/unvoiced detector:

• "Unvoiced" (LED 3 on) : "high"

• "Voiced" (LED 3 off) :

You can use this gate signal for more elaborate sound

manipulation (see 5. User examples).

Voiced/Unvoiced Detector

"low"

A-129 /5