Doepke DRCCB 5 ST Instrukcja instalacji i obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Wyłączniki automatyczne Doepke DRCCB 5 ST. Doepke DRCCB 5 ST 4 stron. Two/four-pole residual current circuit breakers

Drukuj stronę
Doepke
DE EN
17,8
124,8
V four-pole
Wiring diagram
1
N
N Lastseite
load-circuit
2
V two-pole
Technical data
Type
Electrical properties
Standards
Distribution System
Rated operational voltage (Ue)
Minimum operating voltage
(Ue min)
Maximum operating voltage
(Ue max)
Rated insulation voltage (Ui)
Dielectric strength
Rated impulse withstand
voltage (Uimp)
Rated frequency
Residual making
and breaking capacity (IΔm)
Rated conditional residual short-
circuit current with fuse (IΔc)
Number of poles
Type of residual current
operated protective device
3932163 | 11/2018 | Doepke Schaltgeräte GmbH, Stellmacherstraße 11, D-26506 Norden
106
45
7,4
6
44
73,5
N
N
V four-pole
Selftest/Selftest
Selftest/Selftest
Restart two­pole
Restart four­pole
Selftest: EN 61008-1,
VDE V 0664-120 (Annex M)
Selftest Restart:
EN 61008-1, EN 50557
Selftest: TT-TN-IT
Selftest Restart: TT-TN
230 V AC
400 V AC
1)
85% Ue
110% Ue
500 V
2500 V AC for 1 minute
4 kV
50 Hz
630 A
10,000 A (gL 63 A) at 25/40 A
10,000 A (gL 80 A) at 63 A
2
A
Type
short-time delayed
Surge current strength
Rated current (In)
Rated residual
operating current (IΔn)
Resistance to earth
to block restart (Rdo)
Resistance to earth
to enable restart (Rd)
Current heat loss per current
path with In
1
3
5
Power consumption
during normal operation
Power consumption
during restart
Restart function
Supply
Mechanical properties
Number of module widths
Reclosing time
2
4
Lastseite
Duration of selftest
load-circuit
6
Maximum switching frequency
Mechanical switching cycles
(number of restarts)
Maximum number of con-
secutive automatic reclosing
operations
2)
Counter reset time number of
consecutive automatic reclos-
ing operations
Wiring
Rated tightening torque
Protection class
Ambient temperature
Resistance to climatic changes
Auxiliary contact properties
Type of contact
Operating voltage
Maximum current
Minimum current
Operating frequency
Utilisation category
Type of contact
Wiring
Rated tightening torque
Key:
4
1. 230 V phase – neutral conductor
2. In a system with no faults
3. Average daytime temperature <= 35°C
4. Contact switches for 100 ms (± 20%) after every successful selftest.
Selftest/Selftest
Restart two­pole
3 kA | 8/20 µs in accordance
with IEC 60060-2
25 A, 40 A, 63 A
30 mA
8 kΩ (Selftest
Restart only)
16 kΩ (Selftest
Restart only)
1.1 W (25 A)
2,7 W (40 A)
3,1 W (63 A)
4 VA (cos φ = 0.2)
41 VA (cos φ = 0.55)
Automatic (Selftest Restart only)
From the top
5
10 s (Selftest Restart only)
3 (Selftest Restart only)
60 s (Selftest Restart only)
≤ 35 mm
, flexible – ≤ 35 mm
2
IP20 (terminals) – IP40 (housing)
-25°C to +60°C
3)
55°C – rel. hum. 95%
PhotoMOS
5–230 V AC/DC
100 mA (cos φ = 1)
0.6 mA
50 Hz
AC 12
Make contact/Break contact/Break
contact with impulse
≤ 2.5 mm
0.4 Nm
Selftest/Selftest
Restart four­pole
Yes
30 mA, 300 mA
8 kΩ (30 mA, Selftest
Restart only)
2,5 kΩ (300 mA,
Selftest Restart only)
16 kΩ (30 mA, Selft-
est Restart only)
5 kΩ (300 mA, Selft-
est Restart only)
1.17 W (25 A)
2 W (40 A)
4 W (63 A)
7
7 s
30/h
4000
, solid
2
2 Nm
4)
2