Cyenne Audio CY-3100 Podręcznik użytkownika - Strona 17

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów Cyenne Audio CY-3100. Cyenne Audio CY-3100 18 stron. High performance digital to analogue converter

Drukuj stronę

TROUBLE SHOOTING

No power. Power LED is off
1)
a. Try pushing the power switch again
b. Check if the power cord is firmly fit
c. Try another wall outlet
d. Check / replace fuse on backside (this is rare)
Remote control doesn't work or have poor range
2)
a. Make sure the power LED lites, otherwise see (1).
b. Push the remote control button again (keep holding the button doesn't work).
c. Move closer, the remote comtrol is guaranteed to work over 3 meters.
d. Try another button, maybe the function, like input, was already selected.
e. Maybe the remote control battery needs replacement.
f. There is strong interference from sunlight, plasma TV, CFL lighting etc. Move the DAC to a different
location.
Music is playing, but display says sometimes "!Bad Data".
3)
corrupted during the last 30 seconds.
a. Check if cables are connected properly and not half inserted etc.
b. Try different and/or shorter digital cables.
c. Use digital audio cables, not cinch analogue (red/white plug) cables.
d. Sample rate too high for optical input. Try 96 kHz or lower.
e. Strong source of interference. Try moving cables around or move the DAC.
f. Strong ground current. Make sure all your equipment with earth connection is properly grounded.
Plug source and DAC into the same grounded power strip.
No sound, display says "Incompatible"
4)
a. The CY-3100 can only play PCM data. Not WMA, AC3, DTS etc. Set the source to decode internally
and output PCM data only.
b. Try different source.
No sound, display says "No signal"
5)
a. No input signal, check source, cables.
b. Digital cable was inserted into the wrong plug on source. Like digital cable inserted into video
output or one of the analogue audio outputs of the DVD player.
c. Source is powered off, check if source is on.
d. Wrong input selected, select correct input.
e. Incompatible sample rate, e.g. 24 kHz. Or 192 kHz on long optical cable.
Digital audio input signal was partly
17