DOF Reality P3 Instrukcja montażu - Strona 16

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Akcesoria do gier wideo DOF Reality P3. DOF Reality P3 18 stron.

5.3 Motor arm is not horizontal in neutral position

Over time motor-sensor coupler bolts may get loose and neutral motor position can get off from

normal (just a bit higher that horizontal). Perform tests as per 5.4 to make sure motor is moving

correctly and proceed with this motor calibration

The default settings are: Fpid / 10, Kp = 120, Ki = 1, Kd = 10, Ks = 5, PWMmin = 0, PWMmax =

180, PWMrev =200, Max limit = 50, Clip Input = 190, Deadzone = 0

0) check all cables and motor connections, and any loose wires inside the control box.

1) close and exit SimRacingStudio

2) Download

http://dofreality.com/SMC3Utils.zip

3) unpack all archive contents into any local folder on your PC

4) Open with notepad file SMC3Utils.ini and set COMM_PORT= to proper COM port number

from your Windows Device Manager (see 5.1)

5) start/run SMC3Utils.exe. If you are getting error messages about COM port communication,

you haven't set port number properly in the previous steps

6) power ON the platform

7) Set it to 'sine' click Motor 1 and Motor 2 and 3 send us ([email protected]) screen shots of

SMC Util charts for each motor separately and SMC under chart settings you have and a short

video clearly showing the problem

5.5 I have troubles installing SRS (Antivirus detects it as a thread)

SRS uses a variety of methods to read the telemetry from the game and some of those methods

will trigger the antivirus. SRS is completely safe and making an exception for SRS will solve the

problem.

You need to click Auto Install button and for some games change in game settings

following this guide

If you did all that and your platform still don't move you need to Open a Ticket.

Assembly Instructions DOF Reality H3 and P3

https://www.simracingstudio.com/download

https://www.youtube.com/watch?v=Wa6hRdMB4vA