Cygnett Unison i-X5 Podręcznik użytkownika - Strona 11
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System głośników Cygnett Unison i-X5. Cygnett Unison i-X5 12 stron. Dynamic speaker system
Specifications
Type:
LF Driver:
HF Driver:
Frequency Response:
Crossover Frequency:
S/N Ratio:
Dynamic Power:
Input Impedance:
Polarity:
Input Sensitivity:
Protection:
Indicator:
Input Connectors:
Output Connectors:
Power Requirements:
Dimension:
Weight:
Finish:
Colour:
Two-way Powered Speaker System
Woofer: 5" magnetically shielded paper cone
Tweeter: 1" magnetically shielded natural silk
55Hz-22KHz
3.0KHz
>95dB (typical, A-weighted)
20 watts RMS 4 per channel @0.5% THD+N
?
10K Ohms Unbalanced
Positive signal at "+" input produces outward
low-frequency cone displacement
100 mV pink noise input produces 95dBA
output SPL at 1 meter with volume control at maximum
RF interference, output current limiting, over
temperature, turn on/off transient, subsonic filter
Power on/off indicator on rear panel
2 RCA Inputs
Aux Inputs
Headphones Output
100-120V/60Hz & 220-240V/50Hz AC Select
272mm(H) x 190mm(W) x 198mm(D)
High Gloss Enamel
Black
8