DOGA BTP Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wkrętak sieciowy DOGA BTP. DOGA BTP 16 stron. Battery screwdrivers
Drukuj stronęWARNING! @READ ALL INSTRUCTIONS@
reduce the risk of fire, electric shock and personal injury.
attempting to operate this product.
instructions in a safe place.
2. GENERAL SAFETY RULES
Work Area Safety
Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust or
fumes.
Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
Keep your work area clean and well lit.
Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust
or fumes.
Keep bystanders, children, and visitors
away
while
operating
Distractions can cause you to lose control.
Personal Safety
Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use tool while tired or
under the influence of drugs, alcohol, or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
Dress properly. Do not wear loose clothing
or jewelry. Contain long hair. Keep your
hair, clothing, and gloves away from
moving parts. Loose clothes, jewelry, or long
hair can be caught in moving parts.
Do not overreach.
and balance at all times. Proper footing and
balance enables better control on the tool in
unexpected situations.
Instructions manual / BTP
Always wear eye protection when working with power tools.
SAVE THESE INSTRUCTIONS
a
power
tool.
Keep proper footing
Always observe the safety regulations applicable in your country to
Understand the following safety instructions before
Use safety equipment.
protection. Dust mask, non-skid safety shoes,
hard hat, or hearing protection must be used for
appropriate conditions.
Use safety equipment.
protection. Dust mask, non-skid safety shoes,
hard hat, or hearing protection must be used for
appropriate conditions.
Tool Use and Care
Use clamps or other practical ways to secure
and support the work piece to a stable platform.
Holding the work piece by hand or against your
body is unstable and may lead to loss of control.
Do not force tools. Use the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
Do not use tool if switch does not turn it on or
off.
Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
Store idle tools out of reach of children and
other untrained persons. Tools are dangerous in
the hands of untrained users.
Check for misalignment or binding of moving
parts, breakage of parts, and any other
condition that may affect the tool operation. If
damaged, have the tool serviced before using.
Many accidents are caused by poorly maintained
tools.
5
Keep these
Always wear eye
Always wear eye