DoggyRide Original Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Produkt do pielęgnacji zwierząt domowych DoggyRide Original. DoggyRide Original 6 stron. Dog trailer/crate
Również dla DoggyRide Original: Instrukcja obsługi (20 strony)
Drukuj stronę
1. Assembly manual Doggyride, the Original
The trailer is already partially assembled inside the carton.
Take the DoggyRide out of the carton and unfold it. By opening the back side and top part you can put
the cross bar in the right position to keep the sides up. Connect the cross bar with a safety pin.
The wheels and tow bar are more easily assembled when the trailer is up-side down.
Remove the safety pin from the tow bar and turn it 180 degrees so that the tow bar points forward. Firm
the tow bar with the same safety pin.
Now you can connect the wheels. First take the axles from the small carton and put them through the
wheel opening so that the riding direction of the tire points forward. The riding direction is a V pointing
as a > sign. The axle is put into the wheel with waved washers around the hub and a regular washer in
the end. Fasten the bolt by hand, then put the axle into the axle holder and firm it with the safety pin.
Now firm the bolt using the tool inside the small carton.
Now you put the trailer back in normal position.
Now you can connect the trailer to the bicycle. Please make sure you connect the safety strap around
the frame part of the bicycle!
2. Connecting the Doggyride Original
Picture 1
The hitch
A.
Hitch part for rear axle
B.
Hitch part on tow bar
C. Safety pin
Picture 3
Take the trailer and put the tow bar hitch part (B) into
the hitch part on the axle (A) and connect the safety pin
(C).
Important: The connection to the bicycle is the most
important part of the assembly and use of the bicycle
trailer. Please do this carefully.
User manual Doggyride, the Original
Picture 2
Remove the bicycle part of the hitch (A) from the tow
bar. In case you have a quick release wheel, take the
pen complete out of the axle and put it through the hitch
part(A). In case you have the rear axle bolted, release
this bolt and connect it together with the hitch part (A).
This part stays permanently on your bicycle.
Picture 4
As soon as the trailer is connected to the bicycle wrap
the safety strap around the bicycle frame, so that in
case the trailer lets loose from the hitch it still is
connected to the bicycle.
English