Dogtra BALL TRAINER PRO Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Produkt do pielęgnacji zwierząt domowych Dogtra BALL TRAINER PRO. Dogtra BALL TRAINER PRO 12 stron. Versatile dual-function launcher/dropper

Drukuj stronę

8. Charging the Battery

The BALL TRAINER PRO receiver uses a lithium polymer battery.

1. Charge the receiver before using the unit for the first time.

2. Do not charge the battery near any flammable substances.

3. Fully charge the battery if the unit is to be stored without use for a period of

3 months or more.

Recharge the Unit If:

• The LED indicator light on the receiver/collar is emitting a red color.

• The indicator light on the receiver will not come on.

• The indicator light on the receiver comes on momentarily, but will not stay

on when the receiver is operated.

Battery Charging Procedure

Note: The unit has a partial charge when it leaves the Dogtra facility. Upon

receipt of the collar, be sure to give it a full 2-hour initial charge before the first

use.

1. Attach the charging cable to the receiver, as shown above.

2. Plug the charger into a 120 volt wall outlet or, if using the auto charger,

plug into a cigarette lighter only for lithium polymer batteries (use a 230

volt European charger for Europe). All indicator lights should glow red

when properly plugged in and the unit will automatically shut off during the

charging process. You will need to turn the unit on again before use once

the unit is fully charged and unplugged from the battery cable.

3. The lithium polymer battery is fully charged within 2 hours. The lights will

stay red during the charging process. The red light will turn green once the

unit is fully charged.

4. After charging, cover the battery charging receptacles with the rubber plug

on the receiver.

Note: Only use Dogtra-approved batteries, chargers, and accessories for your

Dogtra products. When a charger is not in use, disconnect it from the power

source.

9. Transmitter LED Indicator Light

When you press the corresponding button on the transmitter for the

designated receiver, the LED indicator light on the transmitter and receiver

will both light up momentarily.

Checking the Battery Life

The LED indicator color indicates the battery life level.

Green light when pressed = Battery full charge

Green light blinks when pressed = Battery needs to be replaced

If the unit is used while the LED indicator light blinks green, it may shut down

automatically.