DogWatch Performance Series Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Produkt do pielęgnacji zwierząt domowych DogWatch Performance Series. DogWatch Performance Series 16 stron. Hidden fence systems
Również dla DogWatch Performance Series: Instrukcja obsługi (14 strony), Instrukcja instalacji (10 strony), Instrukcja obsługi (13 strony)
Drukuj stronę
Contact Posts: The receiver comes with a set of contact posts. Your DogWatch
Dealer will determine the correct set based on your dog's neck shape, coat, and skin
sensitivity. The posts must make contact with the skin in order for the dog to feel the
correction. In certain cases, your dealer may recommend clipping some of the hair
around the contact posts so that they can touch the skin more easily. Use care if you
find it necessary to tighten the contact posts with the collar wrench, as over-
tightening could cause damage to the receiver.
Antenna: The receiver's omni-directional antenna design assures optimal reception
from the signal field.
Test Light: The test light allows you to test the receiver. Hold the test light over the
contact posts and carry the receiver into the signal field a few feet from the ground.
When the receiver picks up the signal from the boundary wire, the audible warning
will sound and the test light will come on when you enter the correction zone.
Status Light The light continuously monitors your receiver
and provides these features.
I
Start-Up
When you first insert the battery into your
receiver, the status light will flash
indicates that the receiver has started properly. Once
started, the status light will continue to flash
once every 30 seconds indicating normal operation.
In the event that the light does not flash, check the
battery to be sure that it has been inserted properly.
I
Training Level Indicator
training level of your receiver (see page 8), the status
light will flash
The number of flashes/beeps will equal the training
level you have chosen.
I
Signal Field Indicator
signal field, the status light will flash
receiver is in the audible zone and will flash
green
when the receiver is in the correction zone.
I
Correction Alert
tested the boundary by looking at the status light. The
status light will double flash
during the 24-hour period after the dog has entered the
boundary area.
I
Battery Indicator
level of the battery. Once the receiver detects that the
battery has reached a low voltage level, the status light
will change from the normal blinking "green" every 30
seconds to blinking "red" every 10 seconds. This
indicates that your battery is close to the end of its
useful life and you should change the battery within the
next 3-4 days.
See page 7 for how to change your battery and reset your receiver.
When programming the
green
in conjunction with audible beeps.
When testing the receiver in the
You will be able to tell if your pet has
green
This feature monitors the voltage
red
and green. This
green
green
when the
red
and
every 30 seconds
6
Using the Test Light
The R 7 Status Light
The R9 Status Light