Akrobat XCITYX FLAT Instrukcja instalacji i obsługi - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Sport i rekreacja Akrobat XCITYX FLAT. Akrobat XCITYX FLAT 9 stron. 17 x 12 ft

How to measure the hole depth

To properly measure the depth of the hole, use the measuring tape provided in the kit. Stretch the tape

over the entire dimension of the trampoline pit. Smaller holes on both sides of the measuring tape indicate

the dimension of your trampoline size. When placing the measuring tape in the area, it is first necessary

to check that the measuring marks indicate the edge dimension of your trampoline. Once the edge

dimension is determined, then you can easily define the central position of the pit, which indicates, where

the pit for your trampoline should be the deepest (120 cm / 3'7''). Always use a measuring tape to check the

correct depth of the pit - the depth of the pit depends on the size of your trampoline.

THE MIDDLE

OF THE PIT

INSTALLATION AND USER MANUAL - XCITYX FLAT 17 x 12 ft

Cover the complete surface with the weed

protection, then place the trampoline frame

into position. Make sure the membrane

'hugs' the shape of the hole and sits right at

the bottom of the hole - keeping wjumping

space under the mat.

Placing the trampoline into the pit

As this trampoline is very heavy we suggest to

have at least four people at installation.

There should be no gap between the ground

and your trampoline.

Carefully place the trampoline on the ledge

covered with the weed protection.

Check that the trampoline is well levelled. You

may want to remove the trampoline to make

any adjustments to the height that the frame

is sitting on. Aim for the trampoline jumping

mat to sit flush to the ground.

Fill the remaining free space around the

trampoline with the remaining soil, then cut

off the excess material of the weed protection.

Finally, re-lay the saved soil around the

trampoline and compact down as much as

possible.