Aseptico COMMAND-AIR ALU-29CF Instrukcja obsługi, konserwacji i lista części - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi, konserwacji i lista części dla Światło robocze Aseptico COMMAND-AIR ALU-29CF. Aseptico COMMAND-AIR ALU-29CF 8 stron. Portable light
PURPOSE:
The Aseptico ALU-29CF Command Air Portable Light contains a halogen operating light which
provides brilliant white light ensuring excellent visibility for field dentistry. The dual-voltage
ALU-29CF features a compact lamp head, flexible gooseneck, telescoping tripod stand and
padded carrying case. This light is highly portable and will fit in the mil-spec hard shell case
included with the ADC-01CS Command Air Portable Dental Chair for easy deployment.
PERFORMANCE CHARACTERISTICS:
LAMP: FTB 20watt/12volt 10°
LAMP LIFE: 2000 hrs. average life.
HEIGHT: 36-64 inches
ARM LENGTH: 32 inches
VOLTAGE: 110-220VAC, 50/60Hz switchable
LIGHT INTENSITY: 1,000 ft. candles at 24" (61 cm)
WEIGHT: 15 lbs.
ITEMS FURNISHED
One (1) ALU-29CF Command Air Portable Light
One (1) Soft padded carrying case
One (1) Operation and Maintenance Manual
One (1) Spare Halogen bulb
One (1) 160mA Fuse (for 220V operation)
One Each 110V & 220V Power Cord
SETUP
:
(Fig. 1)
1.
Remove the ALU-29CF Light from its packing and
carrying case. Unfold the tripod legs to a horizontal
position, slide to the bottom of the center post, and
secure in position by firmly tightening the thumb screw.
Set light on a stable, even floor surface.
Loosen knob on horizontal boom and position where
2.
desired. Tighten to set. Rotate handle counterclockwise
on telescoping center column and adjust to desired
operating height. Rotate clockwise to secure.
3. Ensure that the correct fuse is installed for the power
source used (refer to Changing Fuse, Page 5). Set the
dual voltage switch to 110V for 110-120V 50/60 Hz
power sources and to 220V for 220V 50/60 Hz power
sources. Attach power cord to receptacle on bottom of
electrical housing and plug cord into a grounded
electrical outlet. NOTE: USA style 110V and 220V
power cords are shipped with unit. Power plug adapters
for the specific country of usage must be purchased
separately.
Figure 1 - Setup
LIGHT BOOM
BRIGHTNESS
KNOB
POWER
SWITCH
POWER CORD
RECEPTACLE
& FUSE HOLDER
POWER CORD
LENS/FILTER
COVER & GUARD
ADJUSTABLE
CENTER COLUMN
DUAL VOLTAGE
SWITCH
Page 3