CYP CP-255I Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów CYP CP-255I. CYP CP-255I 20 stron. Cv/sv/pc/hd/hdmi 1080p scaler box
Również dla CYP CP-255I: Instrukcja obsługi (12 strony)

Drukuj stronę
CYP CP-255I Instrukcja obsługi

6.2 Rear Panel

2
CO-AX OUT
AUX IN
HDMI OUT
HDMI IN
1
3
1
HDMI OUT and CO-AX OUT
Connect the HDMI OUT port to the HDMI input port of your display
such as HDTV or monitor. Connect the CO-AX OUT port to the Coaxial
(S/PDIF) input port of your amplifier for separate digital audio output.
2
AUX IN Input
When the video signal input through the HDMI IN port is from a DVI
source such as a PC, use the AUX IN port to input the audio signal.
3
HDMI IN Input
Connect the HDMI IN port to the HDMI output port of your source
equipment such as a DVD player or Set-top box. You can also use a
HDMI to DVI cable to connect to the DVI output of your PC.
4
RS-232
The port is for firmware update and RS-232 control (refer to section 7.2
for RS-232 commands).
5
PC IN for Video and Audio Input
Connect the PC IN D-Sub (15-pin) port to the D-Sub output port of
your PC and connect the PC IN 3.5mm phone jack to the audio output
port of your PC.
6
Y Pb/Cb Pr/Cr Video and L/R Audio Input
Connect the Y Pb/Cb Pr/Cr (Component) 3 RCA input ports to the
Component output port of your video source equipment such as a
DVD player or Set-top box and connect the L/R audio input ports to
the audio output port of your audio source equipment.
4
RS-232
PC IN
R
PC IN
Cr/Pr
5
7
L
CO-AX
R
L
Cb/Pb
Y
R
L
6
8
CV
DC 5V
SV
9
9