CYP CPLUS-V11PE8 Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów CYP CPLUS-V11PE8. CYP CPLUS-V11PE8 20 stron. 4k uhd+ hdmi audio extractor
Również dla CYP CPLUS-V11PE8: Instrukcja obsługi (20 strony), Instrukcja obsługi (20 strony)
Drukuj stronę
COMMAND
?
HELP
P1
P0
P?
SOURCEDET
SINKINFO
HDCPIN N1
HDCPIN ?
ECHO N1
ECHO ?
FADEFAULT
VER
REBOOT
Note: Commands will not be executed unless followed by a carriage
return. Commands are not case-sensitive.
5
DESCRIPTION & PARAMETERS
Show the full command list.
Show the full command list.
Power the unit on.
Power the unit off (Stand-by mode).
Show the current power state.
Show the current input source detection
state.
Show information about the currently
connected display.
Set the HDCP handling mode for the HDMI
input.
Available values for N1:
1
[Follow Input]
2
[Follow Output]
3
[Apple Mode]
Show the current HDCP handling mode.
Set the console text echo mode behavior.
Available values for N1:
0
[Text echoing is off]
1
[Text echoing is on]
Show the current text echoing mode.
Reset the unit to the factory defaults.
Show the unit's current firmware version.
Reboot the unit.