CYP CMSI-4H4CVL Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik matrycowy CYP CMSI-4H4CVL. CYP CMSI-4H4CVL 20 stron. Hdbaset 4×4 hdmi matrix over cat5e/6/7

Drukuj stronę

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

4 x 4 HDMI Matrix Lite

Over CAT5e/6

LCM: Displays the setting information of each input and output

setting.

IR: IR Receiver window (accepts the remote control signal of this

device only).

POWER: Press this button to power the device on/off. The LED will

illuminate green when the power is on, red when it is in 'Standby'

mode.

LOCK: Press this button to lock all the buttons on the panel; press

again to unlock. The LED will illuminate when locked.

MENU: Press this button to access the LCM menu system, from

here EDID settings can be managed and IP system settings are

displayed.

A~D/1~4 and OUT/IN: Press the OUT or IN button to select the

output or input mode and then press the required number button

to make the selection accordingly.

For example, if outputs A~B need to be set to input 1 and outputs

C~D need to be set to input 2, then the following sequence of

button presses need to be performed:

Press: OUTABIN1MENU,

and then press: OUTCDIN2MENU.

Note: If the MENU button is not pressed the selection will not be

changed.

OUT

LOCK

POWER