CYP CMSI-8H8HS Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik matrycowy CYP CMSI-8H8HS. CYP CMSI-8H8HS 20 stron. 8x8 hdmi matrix
Również dla CYP CMSI-8H8HS: Instrukcja obsługi (16 strony), Instrukcja obsługi (16 strony)

Drukuj stronę

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

8X8 HDMI MATRIX CMSI-8H8HS

LCM

Displays the setting information of each input and output

setting.

POWER: Press this button to power the device on/off. The LED will

illuminate green when the power is on, red when it is in 'Standby'

mode.

LOCK: Press this button to lock all the buttons on the panel; press

again to unlock. The LED will illuminate green when locked.

IR: IR Receiver window (accepts the remote control signal of this

device only).

MENU: Press this button to access the LCM menu system, from

here EDID settings can be managed and IP system settings are

displayed.

Note: For the 'TV' EDID setting, the unit will read and store the

EDID information of the display connected to HDMI output A. For

the 'STD' EDID setting the unit's built-in EDID setting will be used

(1080p@60/12-bit for video and LPCM 2CH for audio).

1~8/A~H and OUT/IN: Press the OUT button and then the number

buttons to select the required output ports, and press IN button

and then a single number button to select the required input

source, finally press the MENU button to confirm the selection.

For example, if outputs A~D need to be set to input 1 and outputs

E~H need to be set to input 2 then the following sequence of

button presses need to be performed:

Press: OUTABCDIN1MENU,

and then press: OUTEFGHIN2MENU.

Note: If the MENU button is not pressed the selection will not be

changed.

POWER

LOCK

OUT