Ashcroft DG25 Instrukcja instalacji i obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Przyrządy pomiarowe Ashcroft DG25. Ashcroft DG25 16 stron. Digital pressure gauge

Drukuj stronę

Ashcroft DG25 Instrukcja instalacji i obsługi

Maximum / Minimum:

Displays maximum / minimum pressure values;

this is initiated upon powering the unit or since

the values were cleared.

1. When in menu mode press

to scroll to 'Max' (maximum display);

this is indicated in small font to the left

of the display's unit of measure.

2. To clear oth Min and Max values, press

and hold

ZERO

3. Release of this key will leave you in

Menu mode. Use

continue scrolling through the menu

options, OR hold,

to measurement mode.

Note: Clearing Minimum / Maximum

values will reflect a blank display except

for the associated Min. / Max. icon and

battery indicator.

Note: The following actions will also

clear min/max values. Power off, zero

gauge function, tare function, field cali-

bration function, units programming,

update rate, or reset.

to return

M ENU

Timer:

Controls how long the gauge will remain pow-

ered ON once the Power key

1. When in menu mode press

to scroll until "TIMER" is displayed.

2. Press

3. Then, press

through values. "NONE" designates that

the gauge will remain ON until the

power key

time. Any other value (1 min [default] /

5 min / 20 min), other than "NONE", will

designate the duration of time this func-

tion will be in effect.

4. Press

timer icon will be shown on the display

and the unit will display "DONE" then re-

turn to Measurement Mode.

Feature: Timer icon will flash 10 seconds

prior to gauge shut down.

is pressed.

to scroll

is pressed a second

to select desired value;