CYP DCT-17 Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik CYP DCT-17. CYP DCT-17 12 stron. 4×1 optical audio switcher with ir remote
Również dla CYP DCT-17: Instrukcja obsługi (12 strony)
Drukuj stronę
6.3 right panel
1
power: Press to turn on the device or to set it to standby mode.
The blue LED on the top panel will illuminate when the device is
powered and switched on.
2
input: Select the input port from 1 to 4. The blue LED on the top
panel will illuminate to indicate the selected source.
3
Optical Out: Connect to an amplifier or active speaker with optical
cable for audio output.
4
ir: IR receiver window that receives the IR signal from the supplied
remote control. Please ensure that there is a clear line-of-sight
between the receiver and the remote.
6.4 rear panel
1
Dc 5v: Connect the 5V DC power supply into the unit and plug
the adaptor to an AC wall outlet.
6.5 remote control
1
pOwer: Press to turn on the devic; press it again
to put the device into standby mode.
2
iNput 1~4: Press the required input button to
select the input source.
3
Power Input
Optical
IR
Out
1
2
3
4
DC 5V
1
1
2