dol sensors iDOL 65 Techniczna instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Techniczna instrukcja obsługi dla Sprzęt rolniczy dol sensors iDOL 65. dol sensors iDOL 65 8 stron.
Również dla dol sensors iDOL 65: Podręcznik (12 strony), Techniczna instrukcja obsługi (4 strony)
Drukuj stronę5 Electrical Installation
The electrical installation must be made as specified below:
Figure 3: Inside the iDOL 65 box. Make sure that cables and wires are connected as illustrated.
Yellow/green (PE), Blue (N), Brown (P). Use the two cable relief brackets to secure the power cable.
The LAN cable must be led under the plastic bracket and fastened with the enclosed cable ties.
The box is prepared for forwarding the supply from one box to the next.
Network
The camera must have access to the Internet via one of the two Ethernet ports. The Ethernet cable must not
exceed 100m.
The iDOL 65 is equipped with two Ethernet ports LAN 1 and LAN 2, meaning that the iDOL 65 can be con-
nected in series. This means that the network from one iDOL 65 can be forwarded to the next. LAN 1 is used in
direction towards the router and LAN 2 to the subsequent iDOL 65 in the series.
iDOL 65 requires a stable connection with a minimum bandwidth of 1Mbit/sec. Download and 0.5Mbit/sec. up-
load.
The network (connection to internet) must allow for:
• A dynamically allocated IP for IDOL 65 (DHCP)
• TCP I/O access to port 8883 (secure MQTT)
• TCP I/O access to port 443 (secure HTTP)
• TCP/UDP I/O access to port 53 (DNS)
• TCP/UDP I/O access to port 123 (Time server)
4
Cable tie 200 x 4.8mm
Terminal block
Screw 3x20 TX 10
Cable relief bracket
www.dol-sensors.com
Technical User Guide
iDOL 65 Camera