CYP CH-1106TX & RX Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Nadajnik CYP CH-1106TX & RX. CYP CH-1106TX & RX 16 stron. Hdmi over cat5e/6 transmitter and receiver set
with ir source control
Również dla CYP CH-1106TX & RX: Instrukcja obsługi (16 strony), Instrukcja obsługi (16 strony)
Drukuj stronę
6.2 Receiver Front and Rear Panels
Front
VIDEO
CAT6 INPUT
1
1
VIDEO INPUT
Connect the video output of the transmitter to the video input of
the receiver using a CAT5e/6 cable.
DDC INPUT
2
Connect the DDC output of the transmitter to the DDC input of the
receiver using a CAT5e/6 cable.
3
POWER 5V
Plug the 5 V DC power supply into the unit and connect the
adaptor to an AC outlet.
HDMI OUTPUT
4
Connect the HDMI output to the HDMI or DVI input (with a HDMI to
DVI adaptor) of a display such as an HDTV or HD monitor.
5
IR RECEIVER
Connect to the supplied IR extender cable for IR signal reception.
Ensure that remote control being used is within the direct line-of-
sight of the IR extender.
DDC
2
Rear
POWER 5V
HDMI OUTPUT
3
4
IR
Receiver
5
4