CYP CH-1527TXV Instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Nadajnik CYP CH-1527TXV. CYP CH-1527TXV 20 stron. 4k uhd+ hdmi over hdbaset transmitter (pse) & receiver (pd)

Drukuj stronę

HQ/STD LED: This LED will illuminate whenever the AVLC function

is active. A green LED indicates that AVLC is in HQ (High Quality)

mode. A red LED indicates that AVLC is in STD (Standard) mode.

POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

LINK LED: This LED will illuminate solidly when a live connection with

a compatible Receiver is active. The LED will blink with a regular

pattern if a Receiver is connected but there is not currently a live

signal. The LED will blink with an irregular pattern if a connection

error has occurred.

6.4 Receiver's Rear Panel

IR2 BLASTER: Connect to the provided IR Blaster to transmit IR

signals to devices within direct line-of-sight of the IR Blaster.

IR1 EXTENDER: Connect to the provided IR Extender to extend

the IR control range of remotely located devices. Ensure that the

remote being used is within direct line-of-sight of the IR Extender.

CAT5e/6/7: Connect to a compatible HDBaseT Transmitter with a

single Cat.5e/6/7 cable for transmission of all data signals.

HDMI OUT: Connect to an HDMI TV, monitor or amplifier for digital

video and audio output.

IR2

IR1

BLASTER

EXTENDER

CAT5e/6/7 IN

HDMI OUT